Forum Help

World Discussion Forums  149
visitors
now

World Discussion Forums        
     Add to Favorites            Digg It Digg this stuff!              More Discussion Forums  Search Forums     Show all topics in this forum

Home Experiments Forum
Forum topic/blog entry started by BIG SMOKE on 7/3/2006 3:39:54 (server time).
This topic has been viewed 33033 times.

           
           

need help how to make a bomb thats realy loud plz read


ok i need somthing that will explode with a realy loud bang  i dont care about damage just wanna scare people  n i need somthing i can like carry on me n just like drop in to a garbage can n have it go bang got lots of soda cans n beer bottles  or ican go buy a soda i have a tiny bullet i found somewhere i duno what kind it is all i kno is its live so im thinking i can use that somehow ( without taking it apart )   also no gun powder n all that stuff if i could get it i would have by now lol also i dont think i got lighter fluid  got lots of house hold cleening stuff i duno guys help me here need something ican do with a bullet n a 20 oz coke bottle  or a normal size glass beer bottle

anyways plz people email me with some ideas babdaboombadabingbabdabang@yahoo.com
Reply from/
Date
Replies
good fun

7/29/2006 3:21:31
put strips of tinfoil into an empty coke bottle then tip draino into the bottle then put the lid on the bottle then put in recycle bin then walk away. will blow up loudly and acid will go thru all thir bin.
Deodarant man

8/24/2006 2:38:28
ok . what you do is get a deodarant can get a news paper open out the newspaper . so its at the middle section . then place the dedarant can in the centere . refold the paper and light the paper . easy explosion
petrol boy

9/9/2006 5:12:49
put heaps of petrol in a glass bottle put a hole in the lid the do it up with the petrol in it then stick a lit bit of paper over the hole so u r not near it or(put a trail of petrol leading to it) then kabang!!!!!! glass and flames go every were kool!!!!!
vinegar


7/4/2007 5:50:57
get a napkin and put baking powder on it. fold it up and stuff it into the bottle of maybe a couple ouncez of vinegar and close it up. shake and throw hard at something hard. makes a pretty loud pop and will make a mess that doesnt usually wipe off on its own. (mainly all of the napkin residue.) there ya go
matt


5/4/2008 4:58:32
ok get some the works toilet bowl clenar and tin foil crumpel tin foil in not to small balls and put in 2 liter pop bottel and add the works tolit bowl clener and scure on cap really hard and put in big fild and 'f'ing run because that shit blow up 'f'ing loud it will deafen u  be 100 feet away for srapnal reasons!!   i will not be held for your doings with thes instrucshons and  DONT KILL UR SELF

[Posted from : CANADA]
jelly rogers


5/19/2008 8:30:10
if u dont have oilet bowl u can use batery acid. watch out battery acid will explode faster than the oile bowl and its way more dangerous than he oile bowl. I will not be held responsible for ur stupids actions.

[Posted from : UNITED STATES]
ganesh


5/19/2008 8:36:49
WTF is an 'oile' bowl?

[Posted from : AUSTRALIA]
taze


7/24/2008 9:58:16
get a AA batery,hidrogen proxide, 2 leater botle,sharp nail & a hamer . 1st make a hole on da negative side doo it w/ da nail doo it jently .wen da batery lets air out da chemikles r harmles so cut da batery open . wen open take out da roled up paper in cide . den da paper haz some blak spots skrape dem off w/ da nail .let da blak spots dry 4 one hour .wen dry crunch dem up . den put 2.16 ozs of hidrogen proxide in da botle den da blak stuf u crunched up den put da lid on as fast & tight den u got 10 sec

[Posted from : UNITED STATES]
pf


8/19/2008 10:56:04
Homemade bomb

Materials/tools
Paper of any type.
Preferably thin paper works well with glue.
Rocket engines.
You can find. The size depends on how big of an explosion ranging from a small flash to a louder boom.
Glue.
Elmers glue worked perfect. Dont get fancy. Cheap Elmers glue. Perfect.
Fuse.
I will explain how to make your own fuse in this out of string, preferably not plastic bases, no polyester, no nylon, and no yarn. Absorbent string.
Matches.
Matches to light the fuse and if you like, make the ignition process much easier.
Take your paper; fold it in half "hot dog" style. Making sure it is very flat. Then take your Elmers glue and put a medium thickness layer of glue on the flat piece of paper that is 4 inches wide and 11 inches long. Put the glue in the middle3 inches. Leaving half an inch or more of no glued paper on the outside. Roll the paper making a tube.
Choice #1. The wider you roll it, the more powder you will need to fill it with, but the bigger the flash, but less bang. If you want someone to see it from far away, this is the way to do it. You can put more paper around it with more glue for a big bang and a big pop.
Seal one end so its an open ended tube.
Choice #2 you can glue it shut, or wrap it with tape. But make sure you dont squish the tube you want to keep it a cylindrical shape and it needs to be hollow for the powder later. Also for a good seal, drop glue down the tube directly over the crack where it sealed. Bad thing it takes more time to dry, good thing, better seal, louder bang, more power.
Now for the explosive.
Rocket engines are perfect for all of your explosive needs. Unwrap them, remove the ceramic ends and CAREFULLY scrape off the black crystals and the stuff that is not dark grey or black. The black crystals are very sensitive. What you have left is a solid tube of high quality gunpowder. And no, you cannot use the solid tube. You have to make it a loose powder so air will get in between the powder and make it explode.
Choice #3 IN the tube of powder there are most likely a very dark part and a color that is lighter. The darker part is good powder with not much smoke. The greyer part is meant for the people who need to see their rockets with a trail of smoke. If you want some good smoke in your explosion, leave them together, if you dont want too much smoke, break them apart. They will probably come apart without much force. Save the gray stuff for another time cuz it makes a very good amount of thick smoke for something that small.
Note: most people think the crushing of the powder will make it explode. WRONG!!!! that is only flash powder. And using flash powder in hobby rockets would be stupid. You wouldnt get a consistent flow. All youd get is a boom. And since that is thick cardboard, it could hurt some people with such a big bang.
Here is the part that gets a little tricky. Take the solid black tube and crush it into a good powder. Mortar and pestle or 2 pieces of wood crushing them. Dont do it all at once. Break it into smaller piece about the size of the tip of your pinky depending on what engine size you are using.
Choice #4 there is advantages and disadvantages to both. Ive tried both methods of crushing. Mortar and pestle makes a Awesome powder, but it gives off a large amount of dust which i dont like. I took a piece of paper and covered the top of the container so no dust came out. The 2 boards are a little harder to manage because when you crush the pieces they come flying out the side. And its annoying until you get them into small pieces. I like the board method because no matter where i am, i have 2x4s to crush them with and i can deal with the pieces as long as Im not on a dark surface where i cant see the pieces.
Make the powder very fine. Youll never get flour consistency, but youll get better than sand which will do. But remember, the finer, the better.
What you will have is a mix of very fine powder and some thick pieces. Sift it till you can find a way to get rid of the thick pieces. If you have all powder and no chunks i give you a high five. Now take the powder and funnel it (you should be smart enough to devise a funnel of sorts) into the tube. Tape the tube a few times to make sure it settles.
Choice #2 again. The other side needs to be sealed also. Glue it shut or clamp it shut then tape it.
Next step. After your tube is dry and the seals are quite good. You need a way to ignite it. Take an exacto knife or a pair of scissors and put a hole in the middle. A small hole, also clear some powder out of the way so your fuse will not fall out or be faulty. It needs to have good contact with the powder.
FUSE!!! This is the second most important part next to your explosive. You can make your own fuse or buy some (very high quality and weatherproof fuse) from an army surplus store. They sell it in rolls for a few bucks. This might go over the 15 dollar budget i quoted depending on how much you buy plus the rocket engine costs. The store bought fuse is the best and youll need more fuse because it burns fast. OR you can do the alternative way. Take some leftover rocket powder and get a very small cup or one of those medicine dosage cups you get with robitussin. Put some rolled up absorbent string into the little cup, since your dont need more than 6 inches, there is no need using up other shit to do it.
Note: Test for absorbency. Soak it in water; run your fingers down it very tightly trying to ring it out, if it still feels damp when you feel it again, youve got some good absorbent string. If you dont have string, take a pair of scissors and cut off a thin strip of a 100% cotton shirt.
Now put the string in a coil at the bottom of the little cup. Take some water and put it in the cup just so its a little above the string. Then take some of that leftover powder that went astray or you didnt use, and put it in the water. Make sure that water is damn good and black. Not a thick paste. But black. Then swish your finger around making sure the powder water gets all over the string. Take a paper plate out and lay your string out on it. You can let it dry over night or depending how much time you have, you can dry it with a hair dryer set on warm. Dont count on making this whole thing in less than 2 hours anyway so plan accordingly. Let the string dry and when you look at it in light you should see little reflective specs. Test an inch of it if you can. It will burn pretty slowly but dont be a dumbass. Use 3 inches on your explosive. You now are very close to being done with your small explosive.
Now lead your homemade fuse into the hole that you made.
If you bought fuse or have some good fuse already, ignore this.
How will you get it to stay?? Take some match heads. Like 3 to 6 and pack them in there so the fuse doesnt move easily. Use as little of the match stick as possible. Yes you can pull it out like a dumbass, but handle it by the outside, not by the fuse.
Choice #5. You can make your explosion a little bit louder. Theres a technique here. Dont do it if you dont have time or dont care. Since the fuse is in the middle of the tube. The explosion will concentrate towards the center. Wrap slightly thicker amounts of tape around the middle than around the ends. AND do not go over the fuse. Leave the hole intact. I would say wrap 3 layers of tape around the middle for every 1 or2 on the outside. Dont do this much because it will be ridiculous and the explosion will find a path of least resistance and you wont get a good explosion.
Now with your fuse of choice in place. Id say 2 inches for the homemade because it is slow and it needs to ignite the nearby match heads. And 4 inches for the bought stuff. It burns fast and doesnt need the time to ignite match heads.
Dont be a dumbass. I was. Almost got blinded in one eye from a flying rock. Hit the eye lid. Stand back. Or use a lot of fuse for somewhere where you want a getaway.
Instead of tube you can use a ping pong ball, little toy, or something that doesnt take the glue drying time. But wrap the thin plastic things in tape. Lots of it. Ping pong balls have weak spots. I did it with someone and it just sent a stream of fire about 6 feet up. That and he didnt make it well. And dont be a dumbass who thinks they can modify this to be a huge bomb. It is meant for small things. And lots of rocket engines are expensive. I paid 15 bucks for a pack of 3 E engines. They lasted me awhile, but i had exposed powder lying around for a few months.
Keys to a good small homemade explosive:
Fine powder, few chunks.
Good fuse contact with powder.
Good wrapping, even wrapping.
Good seals on the end.
Looks good, not something a koala just shat.
I have done this many times. Its fun if you need something to do, and its not ridiculous like most of the fertilizer bombs are. Ive been searching this site for reasonable homemade explosives and when i couldnt find them, i made my own. Feel free to experiment and take pictures lots and lots of picture. Use different containers, more or less glue, thick or thin paper.
pf


[Posted from : UNITED STATES]
meeeee


9/21/2008 1:56:19
idk i know there is a paper bomb


[Posted from : UNITED STATES]
Schecter-7


2/6/2009 7:11:39
just read the new one i posted DEMONIC EXPLOSION.

[Posted from : UNITED STATES]
sane


3/2/10 4:13:35 PM
r u crazy?
bob


5/13/10 1:35:05 PM
Just mak a paper poper look it up
andy


7/18/10 8:24:06 AM
ur all off ur fking nuts. what the fk u want a bomb for
Trevor


7/18/10 9:57:06 AM
Andy, thankfully not everyone is a boring conformist. Maybe if you learned a little about the oxidisation of chemicals etc you wouldn't be such a small-minded, boring, ignorant twit. Do you really think a lack of experimentation and learning new things would be good for society?
nick


8/12/10 12:54:25 PM
get a water bottle and put dry ice in it and then close it tightly. its not that dangerous but it makes a realy loud sound.
DntWryBoutIt


9/22/10 10:54:07 AM
Dig a hole in the ground. maybe 6 inches or so. then take 4-5 packs of fireworks and point them straight down in the hole. tie as many fuses together then light it. Get the Fuck out of there. U can die from the explosion. Ive seen it take out a f***ing fence post.
Anon


2/28/11 8:19:06 AM
sparkler bombs are my fav.wrap 50-1000sparklers together in duct tape or electric tape,u need to wrap them with 15+ layers.stick in a small fuse and RUN LIKE HELL.
lol
Damien666


3/14/11 11:03:35 AM
jus put bout 5 AXE cans in a fire. if u really wanna make it intresting, u just put Aerosol cans with it. I've did it, & it made like a 1-2ft deep hole in the ground b4
Anon


3/18/11 8:18:44 AM
You are really, really stupid... You would have to have hundreds of pounds of explosives in order to make a 1-2 foot deep hole in the ground, not just a couple axe cans and an aerosol can. An axe can would produce about a maximum of 5 pounds of explosive energy, try to take a 1-2 foot deep divot out of the ground with a 5 pound weight, it just won't work.

To the OP - Don't take any advice given in this forum, if you want a not very dangerous, but loud, explosion, go to ebay and look for "tannerite". It's inexpensive, it's legal, and it's loud. You can easily whip up a fuse for it and light it up

Here's a link to some tannerite
http://cgi.ebay.com/20pk-Tannerite-1-2-lb-Exploding-Binary-Rifle-Targets-/270452144121?pt=LH_DefaultDomain_0&hash=item3ef83437f9
Mickeyy


4/17/11 3:05:48 PM
Homemade bomb

Materials/tools
Paper of any type.
Preferably thin paper works well with glue.
Rocket engines.
You can find. The size depends on how big of an explosion ranging from a small flash to a louder boom.
Glue.
Elmers glue worked perfect. Dont get fancy. Cheap Elmers glue. Perfect.
Fuse.
I will explain how to make your own fuse in this out of string, preferably not plastic bases, no polyester, no nylon, and no yarn. Absorbent string.
Matches.
Matches to light the fuse and if you like, make the ignition process much easier.
Take your paper; fold it in half "hot dog" style. Making sure it is very flat. Then take your Elmers glue and put a medium thickness layer of glue on the flat piece of paper that is 4 inches wide and 11 inches long. Put the glue in the middle3 inches. Leaving half an inch or more of no glued paper on the outside. Roll the paper making a tube.
Choice #1. The wider you roll it, the more powder you will need to fill it with, but the bigger the flash, but less bang. If you want someone to see it from far away, this is the way to do it. You can put more paper around it with more glue for a big bang and a big pop.
Seal one end so its an open ended tube.
Choice #2 you can glue it shut, or wrap it with tape. But make sure you dont squish the tube you want to keep it a cylindrical shape and it needs to be hollow for the powder later. Also for a good seal, drop glue down the tube directly over the crack where it sealed. Bad thing it takes more time to dry, good thing, better seal, louder bang, more power.
Now for the explosive.
Rocket engines are perfect for all of your explosive needs. Unwrap them, remove the ceramic ends and CAREFULLY scrape off the black crystals and the stuff that is not dark grey or black. The black crystals are very sensitive. What you have left is a solid tube of high quality gunpowder. And no, you cannot use the solid tube. You have to make it a loose powder so air will get in between the powder and make it explode.
Choice #3 IN the tube of powder there are most likely a very dark part and a color that is lighter. The darker part is good powder with not much smoke. The greyer part is meant for the people who need to see their rockets with a trail of smoke. If you want some good smoke in your explosion, leave them together, if you dont want too much smoke, break them apart. They will probably come apart without much force. Save the gray stuff for another time cuz it makes a very good amount of thick smoke for something that small.
Note: most people think the crushing of the powder will make it explode. WRONG!!!! that is only flash powder. And using flash powder in hobby rockets would be stupid. You wouldnt get a consistent flow. All youd get is a boom. And since that is thick cardboard, it could hurt some people with such a big bang.
Here is the part that gets a little tricky. Take the solid black tube and crush it into a good powder. Mortar and pestle or 2 pieces of wood crushing them. Dont do it all at once. Break it into smaller piece about the size of the tip of your pinky depending on what engine size you are using.
Choice #4 there is advantages and disadvantages to both. Ive tried both methods of crushing. Mortar and pestle makes a Awesome powder, but it gives off a large amount of dust which i dont like. I took a piece of paper and covered the top of the container so no dust came out. The 2 boards are a little harder to manage because when you crush the pieces they come flying out the side. And its annoying until you get them into small pieces. I like the board method because no matter where i am, i have 2x4s to crush them with and i can deal with the pieces as long as Im not on a dark surface where i cant see the pieces.
Make the powder very fine. Youll never get flour consistency, but youll get better than sand which will do. But remember, the finer, the better.
What you will have is a mix of very fine powder and some thick pieces. Sift it till you can find a way to get rid of the thick pieces. If you have all powder and no chunks i give you a high five. Now take the powder and funnel it (you should be smart enough to devise a funnel of sorts) into the tube. Tape the tube a few times to make sure it settles.
Choice #2 again. The other side needs to be sealed also. Glue it shut or clamp it shut then tape it.
Next step. After your tube is dry and the seals are quite good. You need a way to ignite it. Take an exacto knife or a pair of scissors and put a hole in the middle. A small hole, also clear some powder out of the way so your fuse will not fall out or be faulty. It needs to have good contact with the powder.
FUSE!!! This is the second most important part next to your explosive. You can make your own fuse or buy some (very high quality and weatherproof fuse) from an army surplus store. They sell it in rolls for a few bucks. This might go over the 15 dollar budget i quoted depending on how much you buy plus the rocket engine costs. The store bought fuse is the best and youll need more fuse because it burns fast. OR you can do the alternative way. Take some leftover rocket powder and get a very small cup or one of those medicine dosage cups you get with robitussin. Put some rolled up absorbent string into the little cup, since your dont need more than 6 inches, there is no need using up other s*** to do it.
Note: Test for absorbency. Soak it in water; run your fingers down it very tightly trying to ring it out, if it still feels damp when you feel it again, youve got some good absorbent string. If you dont have string, take a pair of scissors and cut off a thin strip of a 100% cotton shirt.
Now put the string in a coil at the bottom of the little cup. Take some water and put it in the cup just so its a little above the string. Then take some of that leftover powder that went astray or you didnt use, and put it in the water. Make sure that water is damn good and black. Not a thick paste. But black. Then swish your finger around making sure the powder water gets all over the string. Take a paper plate out and lay your string out on it. You can let it dry over night or depending how much time you have, you can dry it with a hair dryer set on warm. Dont count on making this whole thing in less than 2 hours anyway so plan accordingly. Let the string dry and when you look at it in light you should see little reflective specs. Test an inch of it if you can. It will burn pretty slowly but dont be a dumbass. Use 3 inches on your explosive. You now are very close to being done with your small explosive.
Now lead your homemade fuse into the hole that you made.
If you bought fuse or have some good fuse already, ignore this.
How will you get it to stay?? Take some match heads. Like 3 to 6 and pack them in there so the fuse doesnt move easily. Use as little of the match stick as possible. Yes you can pull it out like a dumbass, but handle it by the outside, not by the fuse.
Choice #5. You can make your explosion a little bit louder. Theres a technique here. Dont do it if you dont have time or dont care. Since the fuse is in the middle of the tube. The explosion will concentrate towards the center. Wrap slightly thicker amounts of tape around the middle than around the ends. AND do not go over the fuse. Leave the hole intact. I would say wrap 3 layers of tape around the middle for every 1 or2 on the outside. Dont do this much because it will be ridiculous and the explosion will find a path of least resistance and you wont get a good explosion.
Now with your fuse of choice in place. Id say 2 inches for the homemade because it is slow and it needs to ignite the nearby match heads. And 4 inches for the bought stuff. It burns fast and doesnt need the time to ignite match heads.
Dont be a dumbass. I was. Almost got blinded in one eye from a flying rock. Hit the eye lid. Stand back. Or use a lot of fuse for somewhere where you want a getaway.
Instead of tube you can use a ping pong ball, little toy, or something that doesnt take the glue drying time. But wrap the thin plastic things in tape. Lots of it. Ping pong balls have weak spots. I did it with someone and it just sent a stream of fire about 6 feet up. That and he didnt make it well. And dont be a dumbass who thinks they can modify this to be a huge bomb. It is meant for small things. And lots of rocket engines are expensive. I paid 15 bucks for a pack of 3 E engines. They lasted me awhile, but i had exposed powder lying around for a few months.
Keys to a good small homemade explosive:
Fine powder, few chunks.
Good fuse contact with powder.
Good wrapping, even wrapping.
Good seals on the end.
Looks good, not something a koala just shat.
I have done this many times. Its fun if you need something to do, and its not ridiculous like most of the fertilizer bombs are. Ive been searching this site for reasonable homemade explosives and when i couldnt find them, i made my own. Feel free to experiment and take pictures lots and lots of picture. Use different containers, more or less glue, thick or thin paper.
pf
Anon


4/18/11 2:11:55 PM
another one,hepas of caps bunched together in cling wrap and tape,hammer it if it is small chuck something heavy on it from a distance if it is a big one,it can take an eye out
Jake


5/30/11 3:50:18 AM
take an aeresol can and a blow torch and fire the blow torch on the bottom of the can where it is caved in. i did this before with a can i thought was empty that i was using to spray hairspray in my potato cannon. it seems dangerous but it really isnt because they force from when it blows propels the can the opposite direction. ever since the first time i did this the can always went away from me just make sure the top of the can is pointed away from you its very loud and if u aim it at a window or something could be dangerous. also try putting vinegar and liquid soap in a water bottle and putting baking soda in  a napkin and putting it in and tighten the lid. then take a bit of PVC pipe about a foot to two feet long that the water bottle will fit in snugly and make sure the cap is aiming away from you and tape the end that is pointing towards you shut and wait for it to explode this might not be a good explanation so if it dont work for you thats why but it worked for me.
austin


8/2/11 10:11:42 PM
throw a battery in the fire haha
Dude


8/19/11 3:19:07 AM
there are many fun homemade bombs you can make... and if you're looking for noise, try the classic 'The Works' bomb, mentioned somewhere above. The Works works well (pardon the pun), bun any hydrogen chloride-incorporating household cleaner will work well, the higher percentage, the better. It is usually sold as toilet bowl or drain cleaner. Put about 3-4 inches of it in a 2-liter coke bottle, and then add some aluminum foil balls to the cleaner. cap the bottle and shake for just one second, and set down and run/throw. If you set it down, you will see the mixture reacting slowly at first, but as the pressure and temperature in the bottle increases, the reaction accelerates. the bottle will expand around the middle immensely, about half again of the original 2 liter bottle. then it pops. I got the cops called on us the first time I tried this (I got away, sly me...). It's loud. Enjoy!

PS. Anon, 3 pounds of c-4 plastic explosive will make a meter-deep hole in the ground, and trevor, YES.
morton


11/24/11 11:19:03 AM
get a bullet and take the actual bullet out get a sparkler then put it in the place where the bulet was if it is not a tight fit then get some paper and rap it oround the end of the sperkler thats going in to the bullet yhen get some masking tape tnd wrap it around the end of the bullet and the sparkler then loght and bang (note do not use a bullet bigger than a 30-06) dont get within 5 meters of the bullet when lit have fun
meh


11/24/11 11:19:15 AM
throw a bag of bullets in the fire haha
theanswerman


4/7/12 9:00:31 PM
I made a works bomb using a mountain dew bottle, aluminum foil, and the works. to make it really loud i wrapped the bottle in eclectic tape "i only wrapped the top and bottom, i left the middle of the bottle with label tape less. that way it only expands in the middle and it is a whole lot louder."i have shot several different guns before and it sounded as loud as a shotgun. don't do it in populated areas the cops will come and you will get arrested. i would compare the noise levels to a flash grenade on mw3
mohit


6/19/12 6:57:31 AM
coool
ashish


8/9/12 7:22:29 AM
all the iwith hoysehold material,,,,,,,,,,,,,pls any body can giv me a simple idea to make it.
nformation is neccesssry bt it need to simple man to study about the how to make the bombs
Scopes


8/13/12 10:09:00 PM
Loud bang

Materials:
Caps (the things you put in a cap gun)
Sparklers
Glad wrap
electric tape

1. Put the caps into a square of glad wrap.
2. Break up a few sparklers
3. Put the sparkler powder onto the caps
4. Make the glad wrap into a ball with the caps on the inside
5. Poke a hole in the ball making sure there are no caps there ir it may blow up in your face
6. Put a sparkler in the hole so its like a fuse
7. Cover the ball in electic tape make it tight so the pressure stays in the ball
8. Light the sparkler and wait
This should make quite a loud bang if you put enough caps in.
it hurts ass


10/10/12 7:32:07 AM
i did the axe thing but i won like 30 at a fair and i taped them together and taped three bic lighters together and threw the lighters on the ground next to it it made a huge explosion knocked  me out and got grounded
unknown


6/5/13 10:58:58 PM
Get some chlorine (the one you use for the pool) it has to be the granulated. Put the chlorine in a bottle, then put alcohol in the bottle as well. put the tap on and shake it for 20 secs. THROW IT AS FAR AS YOU CAN. It will be REALLY loud. it takes about 3 mins to explode.
aniket


10/31/13 6:33:23 AM
take a coke can .fill it with tips of matchstichs upto brim.adjust an ignite jaut to spark off the stuff.wrap in allround with copper wire to form a bit thick layer....just ignite it and enjoy
View printable version of this topicPrint     collore smoke bomb petes to bombs    Topic 49 of 168

VigLink banner ad

Show Smiley's

Instant Chat

 Post a reply                 You have full membership for these forums
Name    [nickname if you like or Anon if you want to be completely anonymous]

 Your reply here...    [Please stay on topic. Previously spammed affiliate links may have referrer removed.]


Your Avatar: (optional)
   

[Avatar must be available on the web. Enter its URL above then click 'Get It'. Maximum
image size is 150x150 pixels. Your Facebook pic can be used with this method. You can get
your Facebook avatar URL by opening Facebook, right-clicking your pic and selecting 'Properties'.
Your pics URL/address will be shown. Copy it, then paste it here and click 'Get It'.]


Email me when new replies are posted to this topic
(Optional. Not displayed.)




 
Disclaimer        Rules